Original Ethernet LAN communications was a mere 10MBs and that 900 ft distance is true for all 10MB Ethernet hub and switches. Original Ethernet LAN communications was designed and deployed on a copper coax buss topology that could travel up to 900 feet or 275 meters.This was the standard distance for Ethernet. Sometimes they can be mis-labeled and referred to as an Ethernet Repeater, CAT5 Extender, CAT 6 Extender, Ethernet Bridge, Network Bridge, Coaxial Cable Extender, LAN Extender – all of which are terms for the results, but not an accurate description of our technology at Enable-IT designed to extend effective Ethernet Distance. An industrial ethernet extension eliminates that need and additional costs for you to extend your Ethernet LAN network. This requires electrical power every 100m or 275m if using coaxial cable for Ethernet installers. Coaxial cable Ethernet is limited to 275 meters (900 Ft) Coaxial cable is also capable of being used with a converter to deploy Ethernet as was the original Ethernet transport.Īll Ethernet device manufactures since then have limited your installable Ethernet Distance limit to 100 meters unless you add another powered Ethernet device to bridge and boost the Ethernet signal to another 100m (328ft). In the late 1980’s Twisted pair wiring for Ethernet became the preferred cable standard, however Ethernet over Twisted pair has a maximum length of cat6 cable without data loss. An ethernet extender is a computer network communication module that can leverages ethernet distance and WAN technologies in concert to transparently drive Ethernet LAN communications beyond the IEEE 802.3 specifications for today’s twisted pair wiring distance limitation of 328 feet or 100 meters.
0 kommentar(er)
